- 28 -
1.
2.
3.
SHELF
STANDARD
SHELF
STANDARD
SHELF
BRACKET
SHELF BRACKET HOOK
HOOK
SHELF
STANDARD
SLOT
FLAT SHELF POSITION
5
v
SHELF POSITION
SHELF BRACKET TAB
0 AND 5
v
4.
Once all shelf brackets are installed in desired position run each shelf light cord into ½ hole in back of
shelf bracket and out the ½” hole in the front of shelf bracket. The shelf light cord length can be
adjusted by pulling out cord from cord grommet or pushing cord back into cord grommet.
5.
Install front shelf supports with LED lights on to shelf brackets. All shelf supports with the lights are
the same. The LED light must be facing towards back of case. Hook shelf support end flanges into front
notch of shelf brackets on each side of case.
6.
Install rear shelf supports with no lights on to shelf brackets. All shelf supports with no lights are the
same. The flange on shelf support should be facing towards back of case. Hook shelf support end
flanges into rear notch of shelf brackets on each side of case
7.
Push shelf light cords into end of LED light. NOTE: Do not plug cord in backwards. There are (2)
humps on end of cord that must align with humps in end of LED light.
Plugging in the cord upside down will
Damage LED light strip.
8.
Manage desired cord lengths by pulling out cord from cord grommet or pushing cord back into cord
grommet.
NOTE: Cords always remain in case they are not removable.
