FCAR FD505 Wheel Alignment System User Manual
43
measured value is within the standard range
：
Red font: measured values are outside the standard range
Green font: measured values are within the standard range
Precautions
：
1.
During the measurement process, the object or person between the camera and the
target should be removed to prevent the target from being blocked and affecting the
measurement results.
2.
Before measuring, be sure to center the steering wheel and fix it so that the steering
wheel does not rotate during the cart, which will affect the test results.
4.4
Vehicle adjustment
In the measurement result interface, select [
Adjust the rear wheel
], [
Adjust the
front wheel
] or [
Adjust the caster
] to enter the adjustment interface, as shown in figure
below:
The general adjustment order of the wheels: First the rear wheel and then the front
wheel.
Rear wheel adjustment order: camber angle →toe
Front wheel adjustment order: caster angle→ inclination angle→ camber angle→
wheelbase→ toe
Note:
For more general overview of wheel aligners and analysis of measurement data,
please see the appendix!
