FCAR FD505 Wheel Alignment System User Manual
14
Type
Physical view
Adaptation plan
Long target
large scissor/small scissor
installation plan
Trapezoidal target
Two columns installation plan,
four columns installation plan
Tip
: the target type selection is complete and must be set in [
System Settings
], as shown
in
Chapter 6
.
3
Preparations before wheel alignment operation
3.1
Preparation before operation:
1)
Install the corner plate and lock the corner plate with the locking pin to prevent it
from rotating.
2)
When driving the car, ensure that the tire is at the center of the corner plate. After
stopping the car, tighten the handbrake to ensure that the car does not move, and the
personnel are safe;
3)
Check the rim size and tire pressure, the wear of the tires, the components status of
the steering system and the suspension system, such as the tie rod ball head, shock
absorber, etc. If there is excessive wear or unqualified component, please repair it
first. Then perform wheel alignment.
4)
Knowing the origin of car, manufacturer, models and factory year.
5)
When car pushing compensated and adjusted, please ensure the horizontal position
