Fayat DYNAPAC F1000T T4f, Operation & Maintenance Manual

Page: 48 / 263

D 5
Item Designation Brief description
10 Ignition lock
Key position
- 1: Ignition OFF
- 2: Ignition ON
- 3: Starting position
NOTE:
The key can only be removed in position 1.
11 Horn
Press in the case of emergencies and to indicate when the machine
starts to move!
NOTE:
The horn can also be used to communicate acoustically with the
truck driver for material loading!
12 Travel drive pre-selector
Setting the maximum speed that can be performed when the drive
lever is at its stop.
NOTE:
The speed level is preset with the "Travel drive/engine
pre-selector switch".
13 Straight-ahead travel trimming
This potentiometer has the following functions:
- Steering the paver through a large curved radius:
- Turn the potentiometer in the corresponding direction
until the required steering angle is achieved.
- Straight-ahead travel trimming in speed level 3:
- Set the steering wheel to position "0", then adjust the
potentiometer until the paver is traveling straight ahead.
NOTE:
Automatic straight-ahead travel trimming takes place in preset
speed levels 1 and 2.
14 Truck hitch
Opening and closing the truck hitch device at the front of the paver.
Toggle switch function:
- Toggle the switch left: Open truck hitch.
- Toggle the switch right: Close truck hitch.
Do move or tow the paver until all persons and equipment are
out of the Danger Zone!
15 Open/close hopper
To open/close both halves of the hopper.
Toggle switch function:
- Toggle the switch forward (away from the operator): Close
hoppers.
- Toggle the switch back (toward the operator): Open hoppers.
Do not open or close the hopper until all persons and equipment
are out of the Danger Zone!