Fayat DYNAPAC F1000T T4f, Operation & Maintenance Manual

Page: 44 / 263

D 1
D 1.0 Operation
1 Safety regulations
Starting the engine, the traction drive, the conveyor, the auger, the screed or the lifting devices
can cause severe injury or death.
Make sure, before starting any of these devices, that no-one is working on, in or beneath the
paver or within its danger area!
- Do not start the engine or actuate any controls when this is expressly forbidden!
Unless otherwise specified, the controls may only be actuated when the engine is running!
Never crawl into the auger tunnel or step into the hopper or onto the conveyor. Danger to life and
limb!
- Always make sure during operation that no-one is endangered by the machine!
- Ensure that all protective covers and hoods are fitted and secured accordingly!
- When damage is detected, eliminate it immediately! Operation must not be continued when
the ma- chine is defective!
- Do not let any persons ride on the paver or the screed!
- Remove obstacles from the road and the work area!
- Always try to choose a driver position which is opposite to the flow of traffic! Lock the
operating panel and the driver's seat.
- Maintain sufficient safety clearance from overhanging objects, other machines and points of
danger!
- Be careful when traveling on rough terrain to keep the paver from slipping, tipping or turning
over.
Always maintain control of the machine; never try to use it beyond its capabilities!