Fayat DYNAPAC F1000T T4f, Operation & Maintenance Manual

Page: 149 / 263

D 106
Dust cover
To avoid injury, the individual seat settings should be checked and adjusted before starting the
vehicle.
Batteries
Follow the instructions when jump starting the paver. (See section D 4)
After the adjustments are set, check the seat to
ensure it does not move out of adjustment.
-
Seat forward and back adjustment (1):
The seat can be moved forward or it can be
moved back to adjust the seat; raise the lever
on the lower left side of the seat to release
the lock. Once the seat is in the desired
position, release the lever and the seat will
lock into place.
- Seat back rest adjustment (2): The back
rest can be adjusted to lean forward or lean
back. To adjust the back rest, turn the knob
on the lower front part of the seat. Turn the
knob clockwise to lean the back rest forward;
turn the knob counter-clockwise to lean the
back rest back
-
Armrest positions (3):
The armrest can be lowered to support the arm or it can be raised to be
stowed out of the way.
The batteries are located under the right hand
side (from operator platform) maintenance door.
There are two 12 V batteries to produce the 24V
needed for the electrical system.
For servicing, see chapter F.
Batteries