Fayat DYNAPAC F1000T T4f, Operation & Maintenance Manual

Page: 243 / 263

F 48
To check the oil level in the Planetary
Gearbox:
Gearbox must be filled with fresh, clean oil.
- Fill with oil until the level has reached the oil level check port (C). Insert check and fill plugs and
then tighten.
Hot oil or components can burn. Oil must be at normal operation temperature when draining. Avoid
contact with hot oil or components.
Planetary gear (3)
Care must be taken to ensure fluids are contained
during performance of inspection, maintenance,
testing, adjusting and repair of the paver. Be pre-
pared to collect the fluid with suitable containers
before
opening any compartment or
disassembling any component containing fluids.
Dispose of fluids according to local regulations
and mandate
- Position the planetary gearbox so that the
oil drain (B) is vertical at its lowest point
(about the 6 o’clock position). The oil filler
plug (A) should then be on the Left or
Right outside of the planetary middle.
- Clean the area around the check plug (C)
and fill plugs and the drain plug.
- Place an oil collection container
underneath the planetary gearbox.
- Remove the oil level check plug (C). The
oil level should be at the oil level check
port.
- If the level is low, add oil through the fill
plug (A).
- If the oil looks contaminated, drain the oil
completely.
- Insert the drain plug (B) and tighten.