Fayat DYNAPAC F1000T T4f, Operation & Maintenance Manual

Page: 188 / 263

E 6
2.6 Installing tunnel plates
14
To ensure an optimum material flow - especially in
the case of large paving widths – so-called tunnel
plates (11) must be installed.
They are located directly in front of the auger
distributor and – in conjunction with the auger – is
an ideal system for conveying the material.
When operating with widths of more than 14.4 ft
(4.4 m), two or more combined tunnel plates (13)
must be used.
In this case, additional stabilizing supports (12)
must be attached to the telescopic tube.
The tunnel plates must be directly screwed to the
receptacles provided for this purpose (14); they are
located on the auger frame sides and can be
adjusted in height.
Refer to the auger extension chart to determine
which parts of the conveyor system are required
for the desired paving width.
11
12
13