Fayat DYNAPAC CX8, Instruction Manual, Page: 64 / 180

Machine description
4812165801.pdf 2024-04-22
Using the cab controls.
Defroster
To quickly remove ice or mist, make sure that only the
front and rear air nozzles are open.
Turn the heater and fan dial to max.
Adjust the nozzle so that it blows on the window to be
de-iced, or to remove mist.
Heat
If the cab is cold, open the lower nozzle on the front
columns and the middle nozzles just over the controls
for the heater and fan.
Turn to max heat and max fan speed.
When the required temperature has been reached,
open the other nozzles and if necessary turn down the
heat and fan speed.
AC/ACC
NOTE: When using AC/ACC all the windows must be
closed for the system to work efficiently.
Heater panel
5
1
2
3
4
1. The display shows figures from 0 to 7. Seven
steps for heating and seven steps for fan speed,
where 7 is max. 1. The display shows figures from 0 to 7. Seven
steps for heating and seven steps for fan speed,
where 7 is max.
2. Arrows for up and down steps on fan speed
or heat. 2. Arrows for up and down steps on fan speed
or heat.
3. Fan. When diode is lit it is possible to set the fan
speed with the setting arrows (up and down)(2).
3. Fan. When diode is lit it is possible to set the fan
speed with the setting arrows (up and down)(2).
4. Heater. When diode is lit by the thermometer it is
possible to set the heat with the setting arrows (up
and down)(2).
4. Heater. When diode is lit by the thermometer it is
possible to set the heat with the setting arrows (up
and down)(2).
5. Fan on or off. Diode is lit when fan is activated. 5. Fan on or off. Diode is lit when fan is activated.
52