Fayat DYNAPAC CX8, Instruction Manual, Page: 139 / 180

Maintenance - Every 10h
4812165801.pdf 2024-04-22
Scrapers
Setting - Adjustment
1
2
Release the retaining unit (1) for the scraper bracket
and unscrew the adjusting screw (2) to release.
Push in the scraper bracket and tighten.
Adjust the screw (2) so that the scraper blade lies
approx. 2 mm (0.08 in) from the drum on the same
side as the screw.
Adjust the scraper bracket in or out on the other side
so that there is an equal gap between the scraper
blade and drum, and tighten the retaining unit (1).
1-2 mm (0.04-0.08
in)
2
3
Figure. Scraper setting
1. Retaining unit
2. Adjusting screw
3. Lock nut
The adjusting screw (2) is adjusted until the scraper
blade has a gap of approx. 1 mm (0.04 in) to the roller,
or lies loosely on the roller, along its entire length.
Tighten the lock nut (3).
127