Fayat DYNAPAC CX8, Instruction Manual, Page: 137 / 180

Maintenance - Every 10h
4812165801.pdf 2024-04-22
Sprinkler system/Drum
Cleaning of sprinkler nozzle
3
2
Fig. Nozzle
1. Nozzle
2. Gasket
3. Filter
1
Dismantle the blocked nozzle by hand.
Blow the nozzle (1) and fine filter (3) clean using
compressed air. Alternatively, fit replacement parts
and clean the blocked parts later on.
When working with compressed air, use the
following protective equipment: When working with compressed air, use the
following protective equipment:
Eye protection
Eye protection
Protective gloves Protective gloves
Ear protection Ear protection
Nozzle Colour l/min (at 2.0
bar) gal/min (at
40 psi) Nozzle Colour l/min (at 2.0
bar) gal/min (at
40 psi)
Standard yellow 0.63 0.20 Standard yellow 0.63 0.20
Option blue 0.98 0.30 Option blue 0.98 0.30
Option red 1.31 0.40 Option red 1.31 0.40
Option brown 1.63 0.50 Option brown 1.63 0.50
After inspecting and carrying out any necessary
cleaning, start the system and check that it works.
Hydraulic reservoir - Check fluid level
2
3
Fig. Hydraulic fluid reservoir
1. Fluid sight glass
2. Filler cap
3. Recess for step handle
1
The sight glass for the hydraulic reservoir is visible
from the driver seat.
Place the roller on a level surface and check that the
oil level in the sight glass (1) is between the max and
min markings. Top up with the type of hydraulic fluid
specified in the lubricant specification, if the level is too
low.
The cap can be placed in the recess for the step
handle on the water tank during the filling.
125