Fayat DYNAPAC CX8, Instruction Manual, Page: 155 / 180

Maintenance - Every 1000h
4812165801.pdf 2024-04-22
Maintenance - Every 1000h
Every 1000/3000..... hours of operation
(yearly)
Park the roller on a level surface.
The engine must be switched off and the parking
brake activated when checking or adjusting the
roller, unless otherwise specified. Park the roller on a level surface.
The engine must be switched off and the parking
brake activated when checking or adjusting the
roller, unless otherwise specified.
Ensure that there is good ventilation
(air extraction) if the engine is run indoors.
Risk of carbon monoxide poisoning. Ensure that there is good ventilation
(air extraction) if the engine is run indoors.
Risk of carbon monoxide poisoning.
Diesel engine
Oil change
The oil drain hose for the engine is located inside the
right engine compartment door. Remove a rubber plug
in the floor in engine compartment to drain.
Fig. Underside of rear frame
1. Oil draining of diesel engine
2. Floor plug
1
2
Drain the oil when the engine is warm. Place a
container that holds at least 14 liters (15 qts) under the
drain hose.
Take great care when draining engine oil. Wear
protective gloves and goggles. Take great care when draining engine oil. Wear
protective gloves and goggles.
Open the oil drain valve (1) and allow all the oil to run
out. Close the drain valve and refit the floor plug.
Deliver the drain oil for environmentally correct
handling. Deliver the drain oil for environmentally correct
handling.
Fill with fresh engine oil, see Lubricant specification or
the engine manual for the correct grade of oil.
Fill with the requisite volume of engine oil. See
technical specifications before starting the machine.
Allow the engine to idle for a few minutes, and then
switch off the engine.
Check the dipstick to ensure that the engine oil level is
correct. Refer to the engine manual for details. Top up
with oil if necessary to the max mark on the dipstick.
143