Fayat DYNAPAC CX8, Instruction Manual, Page: 108 / 180

Operation
4812165801.pdf 2024-04-22
Emergency stop
2
1
Fig. Control panel
1. Emergency stop
2. Parking brake
The emergency stop is activated by pressing the
button (1).
Hold the steering wheel firmly and brace yourself for a
sudden stop.
The brake is applied and the engine stops.
After an emergency stop, return the forward/reverse
lever to neutral and deactivate the emergency stop by
pulling up the button (1).
Activate the parking brake (2) and the engine can be
restarted.
Switching off
3
2
1
Fig. Control panel
1. Display
2. Ignition lock
3. Parking brake
Set the speed control in idling position and allow the
engine to idle for a few minutes to cool down.
Do not leave the engine idling for too long periods.
Long periods of idling, more than 10 minutes, can
cause poor engine performance and, if there is a
particulate filter, the service life is reduced
significantly. Do not leave the engine idling for too long periods.
Long periods of idling, more than 10 minutes, can
cause poor engine performance and, if there is a
particulate filter, the service life is reduced
significantly.
Check the display to see if any faults are indicated.
Switch off all lights and other electrical functions.
Activate the parking brake (3) and then turn the
ignition lock (2) to the left to the off position.
Fit the instrument cover on the display and top of the
control box (on rollers without cab), and lock it.
96