Fayat DYNAPAC CX8, Instruction Manual, Page: 149 / 180

Maintenance - Every 500h
4812165801.pdf 2024-04-22
Battery
- Check condition
Fig. Batteries
The batteries are sealed and maintenance-free.
Make sure there is no open flame in the vicinity
when checking the electrolyte level. Explosive gas
is formed when the alternator charges the battery. Make sure there is no open flame in the vicinity
when checking the electrolyte level. Explosive gas
is formed when the alternator charges the battery.
When disconnecting the battery, always
disconnect the negative cable first. When
connecting the battery, always connect the
positive cable first. When disconnecting the battery, always
disconnect the negative cable first. When
connecting the battery, always connect the
positive cable first.
The cable shoes should be clean and tightened.
Corroded cable shoes should be cleaned and
greased with acid-proof Vaseline.
Wipe the top of the battery.
Hydraulic fluid cooler
Checking - Cleaning
3
Fig. Right engine compartment
1. Hydraulic fluid cooler
2. Bottom plugs
3. Drain cooler
1
2
The water and hydraulic fluid coolers become
accessible when the left engine compartment cover is
opened. Warning for rotating fan and drive belts.
Make sure that the air flow through the cooler is
unobstructed. Dirty coolers are blown clean with
compressed air or washed clean using a
high-pressure water cleaner.
Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler. Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler.
During high-pressure washing the batteries must
be removed and the electronics over the batteries
carefully covered. Open the bottom plugs (2) in
the engine compartment as well.
During high-pressure washing the batteries must
be removed and the electronics over the batteries
carefully covered. Open the bottom plugs (2) in
the engine compartment as well.
Wear protective goggles when working with
compressed air or high-pressure water jets. Wear protective goggles when working with
compressed air or high-pressure water jets.
137