Fayat Dynapac CC1200 VI, Instruction Manual, Page: 85 / 201

Miscellaneous
4812313735.pdf 2018-12-28
Short distance towing with switched off engine
Chock the drums to prevent the roller from
moving.
Open the hood and make sure that the propulsion
pump is accessible.
There is a bypass screw (1) located on the pump that
must be unscrewed counterclockwise (max two turns),
to put the drive system (ports A and B) in bypass
mode.
This function enables a machine to be moved without
the drive shaft on the propulsion pump rotating.
Turn the bypass screw (1) clockwise to reset.
71
Fig. Propulsion pump
1. By-pass screw
Chock the drums to prevent the roller from
moving.
1