Fayat Dynapac CC1200 VI, Instruction Manual, Page: 173 / 201

Maintenance - 2000h
4812313735.pdf 2018-12-28
Place a receptacle that will hold at least 7 liters
(7.4 quarts) under the plug. Collect the oil and
dispose of it properly.
159
Drum - Oil change
Fig. Drum, vibration side
1. Drain plug
1
Take great care when draining the fluid. Wear
protective gloves and goggles. Take great care when draining the fluid. Wear
protective gloves and goggles.
Place the roller on a level surface and drive it slowly
until the drain plug (1) is straight down.
- Remove the oil plug (1) and allow all the oil to run out.
- Clean and refit the oil plugs (1).
- Start the machine and run until the oil plug (1) is
positioned straight up.
- Remove the oil plug (1) and fill the drum with the
right quantity and the type of oil according to the
lubricant table.
- Refit the oil plug (1).
Switch off the engine and activate the parking
brake. Switch off the engine and activate the parking
brake.
Place a receptacle that will hold at least 7 liters
(7.4 quarts) under the plug. Collect the oil and
dispose of it properly.