Fayat Dynapac CC1200 VI, Instruction Manual, Page: 55 / 201

Machine description
4812313735.pdf 2018-12-28
Function description, buttons on from/rear
control
41
Mode / Button LED Button 1 Button 2 Button 3 Mode / Button LED Button 1 Button 2 Button 3
Transport mode 0 None None Edge cutter, up Transport mode 0 None None Edge cutter, up
Working mode 1 Vibration, front Vibration, rear Edge cutter, up Working mode 1 Vibration, front Vibration, rear Edge cutter, up
Edge cutter mode 2 Vibration, front Edge cutter, down Edge cutter, up Edge cutter mode 2 Vibration, front Edge cutter, down Edge cutter, up
Spreader mode 3 Vibration, front Spreader Edge cutter, up Spreader mode 3 Vibration, front Spreader Edge cutter, up
Right lever (RH)
Left lever (LH)
1
3
8
Function description - Display
Designation Function Designation Function
Vibration ON/OFF When button 1 and/or button 2 are pressed in and Working mode/Vibration is
activated, vibrations are enabled. Press again and the vibrations are disconnected.
(See figure at the top)
Vibration ON/OFF When button 1 and/or button 2 are pressed in and Working mode/Vibration is
activated, vibrations are enabled. Press again and the vibrations are disconnected.
(See figure at the top)
Selection of drum In Working mode/Vibration with the help of button 1 or button 2 you can select on
which of the drums that the vibration should start, or vibration on both drums. (See
figure at the top)
Selection of drum In Working mode/Vibration with the help of button 1 or button 2 you can select on
which of the drums that the vibration should start, or vibration on both drums. (See
figure at the top)
Edge cutter, down/up In Working mode/Edge cutter Using button 2 the edge cutter is lowered. With button
3 the edge cutter is raised. Using button 1 you select vibration of front drum.
Edge cutter, down/up In Working mode/Edge cutter Using button 2 the edge cutter is lowered. With button
3 the edge cutter is raised. Using button 1 you select vibration of front drum.
Chip spreader, on/off In Working mode/Chip spreader activates the chip spreader with button 2. (See
figure at the top)
Chip spreader, on/off In Working mode/Chip spreader activates the chip spreader with button 2. (See
figure at the top)