Fayat Dynapac CC1200 VI, Instruction Manual, Page: 140 / 201

Maintenance - 500h
4812313735.pdf 2018-12-28
Rubber elements and bolted joints
Check
Wear protective goggles when working with
compressed air.
126
Fig. Drum end
1. Rubber element
2. Fastening screws
3. Bolted joints
2
1
3
Check all rubber elements (1). Replace all elements
where more than 25% of the elements on one side of
the drum have cracks deeper than 10-15 mm (0.4-0.6
in).
Check using a knife blade or pointed object.
Check also that the attachment screws (2) are
tightened.
Fig. Engine compartment
1. Tank cap, hydraulic fluid
1
Hydraulic reservoir cap - Check
Screw off the tank cap and check that it is not clogged.
Air must have unobstructed passage through the cap
in both directions.
If clogged in either direction, clean with a little diesel
oil and blow with compressed air until free passage is
assured or replace the cap with a new one.
Wear protective goggles when working with
compressed air.