Fayat Dynapac CC1200 VI, Instruction Manual, Page: 186 / 201

Maintenance, 3000h
The fuel tank is made of plastic (polyethylene)
and is recyclable.
172
4812313735.pdf 2018-12-28
1
2
2
3
Fig. Engine compartment -
D1703-M-DI-E4B (T4f)
1. Pre-filter
2. Hose clamps
3. Fuel pump
D1703
The prefilter is located to the left of the fuel pump in
the engine compartment.
Loosen the hose clamps (2) using a screwdriver.
Remove the pre-filter (1) and hand in to a waste
disposal site. This is a disposable filter and cannot be
cleaned.
Fit a new pre-filter and tighten the hose clamps.
Start the engine and check that the pre-filter is tight.
Fuel tank - Cleaning
Fig. Fuel tank
1. Fuel tank
1
It is easiest to clean the tank when it is almost empty.
Pump out any bottom sediment using a suitable
pump, such as an oil drain pump. Save the oil in
a container and dispose of it in an approved
manner.
Pump out any bottom sediment using a suitable
pump, such as an oil drain pump. Save the oil in
a container and dispose of it in an approved
manner.
Keep in mind fire risk when handling fuel. Keep in mind fire risk when handling fuel.
The fuel tank is made of plastic (polyethylene)
and is recyclable.
Ensure good ventilation (air extraction) if the
diesel engine is run indoors. Risk of carbon
monoxide poisoning.
Ensure good ventilation (air extraction) if the
diesel engine is run indoors. Risk of carbon
monoxide poisoning.