Fayat Dynapac CC1200 VI, Instruction Manual, Page: 153 / 201

Maintenance - 1000h
4812313735.pdf 2018-12-28
Also check the freezing point. Change the coolant
every other year.
139
Steering cylinder and steering joint -
Lubrication
Fig. Articulated joint
1. Lubricant nipples
1
1
1
Do not allow anyone to remain in the vicinity of the
steering joint when the engine is running. Danger
of crush injury when the steering is operated.
Activate the parking brake before lubricating. Do not allow anyone to remain in the vicinity of the
steering joint when the engine is running. Danger
of crush injury when the steering is operated.
Activate the parking brake before lubricating.
The machine must be in neutral (straight) when
lubricated. All five grease nipples (1) can now be
accessed.
Wipe the grease nipples (1). Grease each nipple with
five strokes of the hand-operated grease gun. Make
sure that grease penetrates into the bearing. If grease
does not penetrate the bearings, it may be necessary
to relieve the articulation joint with a jack while
repeating the greasing process.
Check - Coolant system
Figure. Cooling water container
1. Filler cap
1
Check that all hoses/hose connectors are intact and
tight. Fill with coolant as specified in the lubricants
specification.
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles. Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles.
Also check the freezing point. Change the coolant
every other year.