Fayat Dynapac CC1200 VI, Instruction Manual, Page: 81 / 201

Miscellaneous
67
4812313735.pdf 2018-12-28
Fig. Single -point lift of the roller
1. Machine plate
2. Location of the lifting hook
Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.
Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.
The machine must not be lifted from the ROPS,
(Roll Over Protective Structure) if the machine is
not equipped with a single-point lift.
The machine must not be lifted from the ROPS,
(Roll Over Protective Structure) if the machine is
not equipped with a single-point lift.
The machine must not be lifted from the
single-point lift if the machine is equipped with a
chip spreader.
The machine must not be lifted from the
single-point lift if the machine is equipped with a
chip spreader.
5
1
2
Lifting the roller with a single -point lift
(Optional)
The maximum weight of the machine (5) can be
read on the machine plate (1). The maximum weight of the machine (5) can be
read on the machine plate (1).
Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
accordance with the relevant safety regulations
for the lifting equipment. Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
accordance with the relevant safety regulations
for the lifting equipment.