Fayat Dynapac CC1200 VI, Instruction Manual, Page: 156 / 201

Maintenance - 1000h
1
2
2
3
Fig. Engine compartment -
D1703-M-DI-E4B (T4f)
1. Pre-filter
2. Hose clamps
3. Fuel pump
D1703
The prefilter is located to the left of the fuel pump in
the engine compartment.
Loosen the hose clamps (2) using a screwdriver.
Remove the pre-filter (1) and hand in to a waste
disposal site. This is a disposable filter and cannot be
cleaned.
Fit a new pre-filter and tighten the hose clamps.
Start the engine and check that the pre-filter is tight.
142
4812313735.pdf 2018-12-28
Ensure good ventilation (air extraction) if the
diesel engine is run indoors. Risk of carbon
monoxide poisoning.
Ensure good ventilation (air extraction) if the
diesel engine is run indoors. Risk of carbon
monoxide poisoning.
2
2
3
Fig. Engine compartment -
D1703-M-IDI-E3 (T3)
1. Pre-filter
2. Hose clamps
3. Fuel pump
1
Activate the parking brake.
Switch off the engine and open the engine hood.
Place a container underneath to collect fuel that
runs out when the filter is released.
Place a container underneath to collect fuel that
runs out when the filter is released.
Replacing the pre-filter