manualshive.com logo in svg

Farm King 482, Operator And Parts Manual

Share
Download
Farm King 482 Operator And Parts Manual Download Page 60

Operation - 482 Grain Cleaner

56

Verify that the SMV (Slow Moving Vehicle) emblem, 
all lights and reflectors are clean and visible.

The ratio of the tractor / tow vehicle weight to the 
loaded equipment weight plays an important role 
in defining acceptable travel speed.

TRAVEL SPEED - Acceptable travel speed.

WEIGHT RATIO - Weight of fully equipped or 
loaded implement(s) relative to weight of tractor 
/ tow vehicle.

Travel Speed

Weight Ratio

20 mph (32 kph)

Less than 1 to 1

10 mph (16 kph)

Less than 2 to 1

DO  NOT TOW

More than 2 to 1

Transporting

Always comply with federal, state, local and 
provincial laws regarding the transport of farm 
equipment on pubic roadways.

WARNING

AVOID INJURY OR DEATH

• 

Keep shields and all guards in place

• 

Keep bystanders away.

• 

Do not allow riders.

• 

Always use hazard flashers on the tractor when 
transporting unless prohibited by law.

• 

Always follow local regulations when transporting on 
public roadways. Check with your local authorities.

IMPORTANT

Never exceed 20 mph (32 kph).

WARNING

Use of an unapproved hitch or tractor / tow vehicle 
can result in loss of control, leading to serious 
injury or death.

Tractor / tow vehicle and hitch must have the rated 
capacity to tow equipment.

Tires provided are for low speed towing only. Fill 
tires to a maximum of 32 psi (221 kPa).

Verify that the tractor / tow vehicle is approved for 
transporting the equipment and that the equipment 
is securely attached to the tractor / tow vehicle.

Verify safety chain is installed and properly 
connected before transporting equipment.

Summary of Contents for 482







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands