manualshive.com logo in svg

Farm King 482, Operator And Parts Manual

Share
Download
Farm King 482 Operator And Parts Manual Download Page 39

Assembly - 482 Grain Cleaner

35

Intake Auger Swivel Arm

Figure 23

Install one 1” ID flat washer (Item 2) to the pin on 
the swivel arm (Item 3). Insert the pin of the swivel 
arm into the hole on the swivel mount. Secure the   
swivel arm using one 1-1/4” ID flat washer and 
spring pin 

[Figure 23]

.

Position the swivel mount (Item 1) on top of the 
front frame. Attach using four 1/2” x 1” hex bolts, 
four 1/2” flat washers, and four 1/2” lock nuts 

[Figure 23]

.

Install one 1” ID flat washer (Item 4) to the pivot 
(Item 5). Insert the pivot into the swivel arm. Secure 
the pivot using one cotter pin 

[Figure 23]

.

Install one locking pin (Item 6), spring, and 1/2” flat 
washer to the swivel arm. Secure the washer and 
spring using one cotter pin 

[Figure 23]

.

IMPORTANT

Install the locking pin properly. The spring is 
secured within the bracket using the washer and 
cotter pin.

Figure 24

Install the connector plate (Item 1) to the pivot 
using one 7-1/2” pin (Item 2) and cotter pin 

[Figure 

24]

.

Position the offset plate (Item 3) with the connector 
plate. The long edge of the offset plate must face 
upwards. Attach the plate using two 3/8” x 1” hex 
bolts, two 3/8” flat washers, and two 3/8” lock nuts 

[Figure 24]

.

1

3

2

6

2

1

3

4

5

FRONT

FRONT

LONG 

EDGE

Summary of Contents for 482







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands