manualshive.com logo in svg

Farm King 482, Operator And Parts Manual

Share
Download
Farm King 482 Operator And Parts Manual Download Page 22

Safety - 482 Grain Cleaner

18

Safety Sign-Off Form

WARNING

Instructions are necessary before operating or servicing equipment. Read and understand the Operator 
And Parts Manual and safety signs (decals) on equipment. Follow warnings and instructions in the 
manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, 
repairs or service. Untrained operators and failure to follow instructions can cause injury or death.

Farm King follows the general Safety Standards specified by the American Society of Agricultural and 
Biological Engineers (ASABE) and the Occupational Safety and Health Administration (OSHA). Anyone 
who will be operating and / or maintaining the equipment must read and clearly understand ALL Safety, 
Operating and Maintenance information presented in this manual.

Annually review this information before the season start-up and make these periodic reviews of SAFETY 
and OPERATION a standard practice for all of your equipment. An untrained operator is unqualified to 
operate this machine.

The following sign-off sheet is provided for your record and to show that all personnel who will be 
working with the equipment have read and understand the information in this Operator And Parts Manual 
and have been instructed in the operation of the equipment.

SIGN-OFF SHEET

Date

Employee’s Signature

Employer’s Signature

Summary of Contents for 482







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands