manualshive.com logo in svg

Farm King 482, Operator And Parts Manual

Share
Download
Farm King 482 Operator And Parts Manual Download Page 25

Assembly - 482 Grain Cleaner

21

Preparing For Assembly

IMPORTANT

Equipment may be shipped without some 
components installed due to transport restrictions.

• 

Using the packing list, locate and count the individual 
components and verify that you have received the 
correct number of each component.

• 

Check all the components for damage. If any 
components are damaged or missing, contact your 
Farm King dealer.

WARNING

AVOID INJURY OR DEATH

Before moving the tractor, look in all directions and 
make sure no bystanders, especially small children 
are in the work area. Do not allow anyone between 
the tractor and the equipment when backing up to 
the equipment for connecting.

Move the tractor, equipment and components to 
an area large enough for assembly.

WARNING

AVOID INJURY OR DEATH

Before you leave the operator’s position:

• 

Always park on a flat level surface.

• 

Place all controls in NEUTRAL.

• 

Engage the park brake.

• 

Stop the engine and remove the key.

• 

Wait for all moving parts to stop.

Park the tractor / equipment on a flat level surface.

Place all controls in neutral, engage the park brake, 
stop the engine and wait for all moving parts to 
stop. Leave the operator’s position.

WARNING

AVOID INJURY OR DEATH

Wear safety glasses to prevent eye injury when 
any of the following conditions exist:

• 

When fluids are under pressure.

• 

Flying debris or loose material is present.

• 

Engine is running.

• 

Tools are being used.

IMPORTANT

The directions front, rear, right, and left are viewed 
as the operator sitting in the tractor with the 
equipment hitched to the tractor.

Summary of Contents for 482







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands