Farm King 482, Operator And Parts Manual

Page: 37 / 102

Assembly - 482 Grain Cleaner
33
Figure 19
Position the drum assembly within the grain
cleaner frame. The cone extension (Item 1) should
face rearward
[Figure 19] .
Secure the ends of the drum shaft within the two
pillow bearings (Item 2) on the front and rear frame
[Figure 19] .
WARNING
DO NOT work under suspended parts.
Always use lifting devices, chains or straps of
adequate size and strength when unloading and
assembling components.
Screens
Figure 20
Attach the inner and outer drum screen sections
(Item 1, 2) to the screen supports using 1/4” x 3/4”
self-tap screws (Item 3) and flat washers
[Figure
20] .
Strap the ends of the screen sections to the drum
rings using the appropriate straps.
Tighten the straps with 1/4” x 2-1/2” bolts and 1/4”
nuts.
IMPORTANT
All the strap bolts holding the screens should be
turned so the end of the bolt trails the direction of
drum rotation.
2
1
3
1
DRUM
ROTATION
2