Farm King 482, Operator And Parts Manual

Page: 36 / 102

Assembly - 482 Grain Cleaner
32
Figure 16
Align the inner drum and outer drum. Slide the
drum shaft (Item 1) through the outer drum
[Figure
16]
.
Attach the inner drum screen supports (Item 2) to
the outer drum cone extension (Item 3) using 5/16”
x 1” carriage bolts and 5/16” lock nuts
[Figure 16] .
Attach the outer drum screen supports (Item 4)
to the front drum ring (Item 5) using 5/16” x 1”
carriage bolts and 5/16” lock nuts
[Figure 16] .
Figure 17
Position the drum shaft to extend 8-1/2” past the
front drum ring
[Figure 17] .
Figure 18
Expand and tighten the cone extension (Item 1)
against the drum rings
[Figure 18] .
Position the flow control weldment (Item 2) ahead
of the support ring
[Figure 18] .
Tighten the 3/8” x 3/4” square head set screw (Item
3) on the flow control weldment
[Figure 18] .
Tighten the 3/8” x 3/4” square head set screws
(Item 4) on each of the three drum rings to secure
the drum shaft
[Figure 18] .
Route two B-164 V-belts (Item 5) around the front
drum ring
[Figure 18] .
112.5”
8.5”
3
5
1
5
3
4
2
2
1
4
FRONT
FRONT