manualshive.com logo in svg

Farm King 482, Operator And Parts Manual

Share
Download
Farm King 482 Operator And Parts Manual Download Page 55

Operation - 482 Grain Cleaner

51

Operation

The Farm King 482 Grain Cleaner handles up to 1900 
bushels per hour and uses two stage screening. 
Trash material is discharged onto the ground and 
cleaned grain is discharged from the chute.

The Farm King 482 Grain Cleaner is equipped with 
a trash pan. The trash pan collects and separates 
the trash using an auger.

CAUTION

Read operator and parts manual before operating 
the implement.

Do not permit riders.

Keep all guards and shields in place.

Keep hands, feet, clothing and hair away from 
moving parts.

Stop engine, set brake, remove key and wait for all 
moving parts to stop before servicing, adjusting, 
repairing and unplugging.

Remove bystanders, especially children, before 
starting or while operating.

Block up before working beneath unit.

Review safety instructions annually.

WARNING

ROTATING DRIVELINE HAZARD

Keep shields and all guards in place.

Keep away from moving parts.

Keep bystanders away.

Connect the equipment to the tractor and place the 
support stands into the travel position. 

Move equipment to the work area.

Adjust the height of the front legs to maximize 
capacity.

Position and adjust bins or intake auger (if 
applicable).

Choose the appropriate screen for the work 
required.

CAUTION

Rest cleaner on the two adjustable front legs 
during operation. Do not rest cleaner on jack 
during operation.

Adjust the cleaner height to achieve maximum 
capacity without grain loss through the trash 
chute.

IMPORTANT

3 HP 1725 RPM electric motor is recommended to 
drive the cleaner.

The electric motor with weatherproof switch must 
be supplied by the customer.

Consult electric motor manual for proper operation.

Summary of Contents for 482







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands