Farm King 482, Operator And Parts Manual

Page: 41 / 102

Assembly - 482 Grain Cleaner
37
Figure 27
Position two 3/4” pillow bearings (Item 1) on both
ends of the cooling fan shaft (Item 2). Align one
1/2” spacer (Item 8) and one 3/8” spacer (Item 9)
under the base of each pillow bearing
[Figure 27] .
Position the bearings and cooling fan on the
underside of the trash pan. Connect the cooling
fan shaft with the reducer shaft using one 3/4” ID
coupler (Item 3), one rubber connector (Item 4),
and one 1” ID coupler (Item 5)
[Figure 27] .
Attach the two bearings to the underside of the
trash pan using four 1/2” x 2-1/4” hex bolts, eight
1/2” flat washers (both sides), and four 1/2” lock
nuts.
NOTE: Use the pre-punch holes in the trash pan to
attach the pillow bearings.
Attach the two oil coolers (Item 6) to the underside
of the fan cover (Item 7) using eight 1/4” x 1/2”
hex bolts, eight 1/4” flat washers (both sides), and
eight 1/4” lock nuts
[Figure 27] .
Attach the cover assembly over the cooling fan
and to the underside of the trash pan using eight
1/4” x 3/4” hex bolts, sixteen 1/4” flat washers,
and eight 1/4” lock nuts.
NOTE: Use the pre-punch holes in the trash pan to
attach the cover.
Figure 28
Position two flow control valves (Item 1) to the
front frame. Attach using two 1/4” x 2-1/2” hex
bolts (Item 2), four 1/4” flat washers (both sides),
and two 1/4” lock nuts
[Figure 28] .
5
4
3
2
6
7
8
9
1
FRONT
FRONT
1
2