Farm King 482, Operator And Parts Manual

Page: 32 / 102

Assembly - 482 Grain Cleaner
28
Trash Pan
Attach the two trash pan end brackets (Item 1, 2)
and trash pan side (Item 3, 4) to the trough (Item 5)
using 1/4” x 3/4” hex bolts, 5/16” flat washers, and
1/4” lock nuts
[Figure 8]
.
The stub shaft of the trough flighting must face
front.
Slide the trash pan assembly underneath the
frame. Rest trash pan on frame edges.
Position left and right trash pan side panels (Item
6, 7) on the frame edges. Align holes along bottom
of side panels with trash pan holes. Attach side
panels and trash pan to frame using 1/4” x 3/4”
self-tapping screws
[Figure 8] .
Attach top corners of side panels to frame mounts
using 1/4” x 3/4” hex bolts, 5/16” flat washers, and
1/4” lock nuts.
Slide one 6” single pulley (Item 8) onto the trough
flighting stub shaft. Attach pulley using one key
and two Ø5/16” x 1/4” socket set screws
[Figure 8] .
Slide one 3” single pulley (Item 9) onto the end of
the reducer shaft. Attach pulley using one key and
two Ø3/8” x 1/2” socket set screws
[Figure 8] .
Attach one 3” idler pulley (Item 10) to the slotted
bracket welded to the front frame using one 5/8”
x 3” hex bolt, 5/8” flat washers, and 5/8” lock nut
[Figure 8] .
NOTE: Use 5/8” flat washers as required on both
sides of idler pulley to align with belt
assembly.