RESTRICTED USE ONLY
Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0)
9
Reviewing Pro-LX Sequence of Operations (continued)
Step Process
34
The card is fed past the Print TOF Sensor. All Stop.
35
The Flipper Table Clutch engages.
36
The Lamination Stepper engages.
37
The Flipper table rotates to level. All Stop.
38
Repeat steps 10 through 18 for appropriate number of color/overlay panels.
39
The Print and Lamination drive Stepper Motors engage.
40
The Lamination Card Sensor detects presence of card. All Stop.
41
The Lam Stepper engages.
42
The Card feeds back to the flipper table.
43
The Flipper Clutch engages
44
The Flipper Table rotates to encoding angle.
45
The Flipper Table Clutch disengages. All Stop.
46
The Print and Lamination Stepper Motors activate.
47
The Encoding TOF Sensor detects leading edge of card.
48
The Card feeds to below the magnetic encoder head. All Stop.
49
The Print and Lamination Stepper Motors are engaged.
50
The Magnetic Encoding Head is activated.
51
The Card feeds to the Encoding TOF Sensor. All Stop.
52
Repeat steps 40 through 45 for each verification pass.
53
The Card is fed onto the Flipper Table.
Continued on the next page.
