RESTRICTED USE ONLY
Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0)
40
Reviewing the Top Line LCD Messages (continued)
Message
Cause
Smart Card Error
Unable to encode smart card.
Smart Card Good
Indicates smart card was successfully encoded.
Smart Encoding
Indicates the Printer is writing or encoding data onto the SmartGuard
Access Card. Appears only when using the SmartGuard Security
Feature. See the SmartGuard User
’
s Guide for more information.
Writing Key Data
Indicates the Printer is writing or encoding data onto the SmartGuard
Access Card. Appears only when using the SmartGuard Security
Feature. See the SmartGuard User
’
s Guide for more information.
Wrong Ribbon
Error
The wrong Print Ribbon is installed. See the
Resolving the Wrong
Ribbon error (being displayed incorrectly)
procedure in Section 2,
page 62.
Reviewing the Bottom Line LCD Error / Status Messages
Message
Cause
Card Jam: Lam
Error
A card is jammed somewhere along the laminating path, under the
Printer's Lamination Top Cover. See the
Resolving the Card Jam:
Lam Error
procedure in Section 2, page 55.
Clearing Jam
Indicates error or jam is being cleared. See
Card Jam Errors
in
Section 2, page 53.
Lam Calib Failed
An attempt at calibrating the Lamination Sensor through the Printer
Driver has failed. See the
Resolving the Lam Error/Out Error
Message
procedure in Section 2, page 57.
Lam Cover Open
The Lamination Top Cover is not properly shut. If this appears in
error, see the
Resolving Cover Open Errors
procedure in Section 2,
page 50.
Continued on the next page
