F&S Bondtec 56 i Series User Manual Download Page 11

Page: 11 / 57

For your Safety

2.8

Parent Safety Instructions

2.8.1 Behaviour in an emergency

By operating the main switch with EMERGENCY STOP button, the machine can be stopped from any operating situa-
tion. In order to be able to start the bonder safely again, the cause of the fault must first be eliminated by authorized
personnel.

2.8.2 Qualification of the staff

Only trained and instructed staff may work on the machine.

The responsibility of the staff has to be clearly defined for assembly, commissioning, operation, set-up, maintenance
and repair.

Staff to be trained may only work on the machine under the supervision of an experienced person.

All persons entrusted with the installation, commissioning, operation and maintenance of the machine undertake to:

Read all safety instructions and warnings in this user manual carefully.

Observe the regulations on occupational safety and accident prevention.

All safety and hazard warnings on the machine / system must be observed.

2.8.3 Disposal Considerations

Ensure that the machine is disposed of in an environmentally sound manner and in accordance with local regulations,
or contact the manufacturer.

Summary of Contents for 56 i Series
























































Search results

Summary of Contents for 56 i Series

Reviews:

F&S Bondtec 56 i Series, User Manual, Page: 11 / 57

Search results

Summary of Contents for 56 i Series

Reviews: