21
LIQUID-FOOT PRO SERIES MIDI FOOT CONTROLLER
MIDI CABLE CHOICES
5 PIN MIDI CABLE
:
Almost every music supply store sells standard 5 pin MIDI cables.
Any quality MIDI cable should work fine with your Liquid-Foot
Controller. Typically one MIDI cable will connect to the MIDI-IN
connector and another to the MIDI OUT connector.
Certain equipment will provide multiple signals on a 5 pin MIDI
cable. For example, Liquid-Tracks and AXE-FX hardware will transmit
both MIDI IN and MIDI OUT signals on one cable to the Liquid-Foot Controller. PLEASE BE CAREFUL TO
ONLY CONNECT ONE MIDI IN SOURCE to the Liquid-Foot controller.
7 PIN MIDI CABLE:
You can purchase quality 7pin MIDI cables from Liquid Control. We
have a selection of size from small to larger than 25Ft. Liquid Control
will guarantee only cables purchased directly through us. Some
musical stores sell quality 7Pin cables.
Use a 7 PIN cable to connect POWER + MIDI IN + MIDI OUT signals
on one cable to certain equipment that can support such wiring
setup. Examples are the Liquid Tracks and AXE-FX.
HOW TO CONNECT THE CABLES
ONLY
5pin cables can be used with the MIDI-IN connector of the
Liquid-Foot Controller. Please insure that the cable is properly
aligned prior to forcing cable into the connector or damage can
occur. Align the “notch” of the cable to the top of the Liquid-Foot
connector which has a corresponding notch cutout.
7PIN cables if used can
ONLY
be connected to the MIDI-OUT
connector of the Liquid-Foot. As with 5pin cables, a notch on the
cable hood should align with a notch cut-out at the top of the
connector on the Liquid-Foot Controller.
DO NOT FORCE A CABLE or damage my result.
