81
LIQUID-FOOT PRO SERIES MIDI FOOT CONTROLLER
1.
Liquid-Foot Firmware v1.07c is compatible with valid AXE-FX Firmware v5.25 or compatible
patch sets.
2.
The AXE-FX may contain damaged or corrupted patches that still work within the Axe-FX.
Part of the Auto Program system checks a patch for errors prior to processing. Most likely
these damaged patches will return an ERROR 4X-01 (where X maybe 1-9) when Auto
Loading from an AXE-FX. If you encounter an error, first identify the corrupted patch within
the AXE-FX. Simply watch the LCD while the Liquid-Foot is reading patches. Reference the
last Patch # loaded on the Screen prior to the error message. When you receive an error
message, the Liquid-Foot has successfully determined you have a damaged patch stored
within the AXE-FX. To resolve this problem , simply resave the patch within the AXE-FX so
that the AXE-FX corrects the problem itself. This will NOT change the patch sound in any
way as far as we know. Please refer to your AXE-FX manual for guidance. Recommendation:
Save preset by pressing STORE in the same location. Do not make any other changes during
this process. It will re-write the patch over itself in a non-corrupt format within the AXE-FX.
The Liquid-Foot will now operate and complete the auto load successfully unless you have
other patches that are corrupted. If this happens, follow the procedure above to correct.
ERASE ALL MEMORY
You can also enter this feature by Pressing and holding the MENU key while turning the power
switch on. If you would like to erase the entire memory, press UP. Please BE CAREFUL. YOU
CAN NOT REVERSE THIS PROCESS ONCE IT BEGINS. Make sure to make complete backups of the
controller (and save them to disk) using either a MIDI utility on the PC, or the LIQUID-FOOT JAVA
based Editor itself.
To skip over this utility, press MENU to return to main menu or P5 to scroll to First submenu
item (Advanced MIDI mode).