45
LIQUID-FOOT PRO SERIES MIDI FOOT CONTROLLER
You may want a Preset, or IA switch (using step-thru as an example) to change the current
CC# being used for expression pedal #1. By programming this special command and placing
the new CC# in Data2 (2:), then temporarily this will override the default settings. Defaults
are always returned as soon as a different preset is selected.
SET TEMPO COMMAND
Data parameter will be set to the tempo in BPM. The tempo light will blink in 4/4 timing to
the beat set by this special command. Each beat begins with a RED flash, the remaining 3
quarter notes are green. This command differs from Tap-Tempo in that it will NOT send any
external commands. This is mainly to set the timing of a song/preset, and to further provide
visual tempo information on the TEMPO display. Use the T-TEMPO command if you would
like to transmit Tap tempo information.
.
