NOISE REDUCER NR300
Ultimate Noise Reduction Effects Pedal
Thank you for showing your confidence in us by purchasing the Behringer
NOISE REDUCER NR300. This ultimate effects pedal is specifically designed
to eliminate unwanted noise and hum without altering your tone. Thanks
to its high-performance features it preserves the original attack and
envelope while leaving your playing and dynamics intact.
1. Controls
(1)
This
MODE
switch allows you to chose between
MUTE
and
REDUCTION
mode. Pressing the pedal in MUTE mode
results in muting the whole input signal, to reduce noises
in during pauses for example. In REDUCTION mode,
quiet passages (when noise or hum would get obvious
to the listener) are effectively reduced. Adjustments
to threshold and decay settings are necessary in this case
(see below).
(2)
Use the
THRESH
(old) control to define a level threshold
in REDUCTION mode. When the input signal falls below
this value, the unit starts reducing the signal.
(3)
The
DECAY
control determines how fast the signal reduction
is released when the input signal exceeds the threshold
value again.
(4)
The
MUTE/BATT
LED illuminates when the effect is activated.
It also serves as a battery level indicator.
(5)
The
REDUCTION
LED illuminates when the input level falls
below the threshold and starts getting reduced.
(6)
Use the footswitch to activate/deactivate the effect.
(7)
Use this 1/4" TS
IN
connector to plug in the instrument cable.
V 2.0
(1)
(8)
(9)
(4)
(3)
(5)
(7)
(10)
(6)
(2)
Summary of Contents for Noise Reducer NR300
Page 30: ...30 NOISE REDUCER NR300 ...
Page 31: ...31 NOISE REDUCER NR300 ...
Page 32: ...We Hear You ...
