77
LIQUID-FOOT PRO SERIES MIDI FOOT CONTROLLER
TESTING MIDI COMMANDS
There may be a time that you want to test a MIDI command, or variations of a MIDI command
to see how your equipment responds. This is a simple utility that enables you to “send”
commands over and over. Once you get it right- you can copy down the settings and program
them into your preset, IA switch, Expression Pedal or elsewhere as appropriate.
The MIDI Command will not be sent until you press the S16 (SELECT) key to accept your
programming. At which time it will send the command exactly as you have it defined. Consult
your MIDI implementation guide for the hardware you wish to control for specific commands
and data values that it accepts. Your Liquid-Foot will process all commands and all data values
between 08x and 0Ex messages.
Step 1: Use the UP/DOWN buttons to select the MIDI channel you wish to communicate with.
Step 2: Press S15 (NEXT) to move to the next parameter
Step 3: Use the UP/DOWN buttons to Select the MIDI command you wish to send (say a “C”
message for Program Change).
Step 4: Press S15 (NEXT) to move to the next parameter
Step 5: Use the UP/DOWN buttons, or S1-S10 buttons to enter the first numeric data value
Step 6a: If you are ready to send the command (only one data value)- PRESS S16 (SELECT)
Back to Step 1 to repeat
Step 6b: Press S15 (NEXT) to move to DATA2 if two data parameters need to be entered
Step 7: Use the UP/DOWN buttons, or S1-S10 buttons to enter the second numeric data value
Step 8: PRESS S16 (SELECT) and send the command. Back to Step 1 to repeat
At any time you may press S14 (BACK) to scroll backwards through the parameters on the
screen.
To skip over this utility, press MENU to return to main menu or P5 to scroll to next menu item.
