Using Falcon DOS Portable Terminals
1-6
Falcon
®
DOS Portable Terminals
Inserting a PC Card
All PC cards have two rows of small sockets on one end (refer to
The cards also have face-up and face-down sides. The card manufacturer’s label
is usually on the face-up side.
Figure 1-3: A Typical PC Card
To insert a PC card into a Falcon complete the following steps:
1.
Start with the Falcon face down and the PC card face up.
2.
Insert the end of the card with the sockets into the card slot (refer to
3.
Use the tracks inside the slot to help guide the card.
4.
Push the card firmly into the slot until the ejector tab slides out.
5.
Replace the PC card slot cover.
Turn the Falcon off before inserting or removing a PC card.
Sockets
advuser.book Page 6 Friday, September 27, 2002 4:22 PM