Disk Drives, Organization, Software, & Configurations
5-8
Falcon
®
DOS Portable Terminals
memory. In addition, drive
C
contains Datalight DOS files in a DOS
subdirectory.
PC Card and RF Networking Software
PC card device drivers and utilities as well as RF networking solutions can be
installed to drive
C
(the flash drive) or drive
D
(the RAM drive). Use the Falcon
Configuration Utility to download the necessary files to the Falcon.
System Configurations
Several configurations are possible for the system software on the unit,
depending upon the type of hardware that is to be supported. Two standard
configurations are described below, along with directory structures and default
config.sys
and
autoexec.bat
file descriptions.
Default Configuration
The configuration created by
default.cfg
in the Falcon Configuration
Utility will create a
C
drive that contains
pal2.exe
, part of the Percon
Portable Applications Library (PAL). The data files will be stored on drive
D
.
PC card drivers able to support ATA cards will be loaded.
Figure 5-7: Config.sys File on Drive C for Default Configuration
FILES = 30
REM ---------------------------------------------------------
REM --- Phoenix Card and Socket services for accessing PC Cards
REM ---------------------------------------------------------
device = c:\pcm\cnfignam.exe /NORMAL
device = c:\pcm\pcmssit.exe
device = c:\pcm\pcmcs.exe
device = c:\pcm\pcmata.sys
advuser.book Page 8 Friday, September 27, 2002 4:22 PM
