Falcon DOS Portable Data Terminals, Advanced User'S Manual, Page: 52 / 184

The Falcon Configuration Utility
2-24
Falcon
®
DOS Portable Terminals
Edit 1.
Select a file in the file list and then select
Edit
to change the source path
or destination path for the file.
2.
The
Edit File Properties
dialog box opens (
Figure 2-20
).
Figure 2-20: The Edit File Properties Dialog Box
z
The fields and buttons in this dialog box are the same as in the
File
Selection
dialog box above.
Delete
To delete a file from the list, select the file and then select
Delete
.
Receive
Select
Receive
to begin a file transfer from the Falcon to the PC
1.
When selected, the configuration utility prepares files to be transferred to
the PC and opens the
Important
dialog box (
Figure 2-2 on page 2-5
).
2.
Make certain the Falcon unit is properly connected to the serial port
specified in the Comm Settings dialog box (refer to
page 2-20
).
3.
Then run the
ld.bat
file on the Falcon, and select
OK
in the
Important
dialog box on the computer.
4.
Send
Select
Send
to begin a file transfer from the PC to the Falcon.
1.
The configuration utility prepares files to be transferred to the Falcon
and opens the
Important
dialog box (refer to
Figure 2-2 on page 2-5
).
2.
Make certain the Falcon unit is properly connected to the serial port
specified in the
Comm Settings
dialog box (refer to
page 2-20
).
3.
Then run the
ld.bat
file on the Falcon, and select
OK
in the
Important
dialog box.
Done
Select
Done
when finished selecting and transferring files.
advuser.book Page 24 Friday, September 27, 2002 4:22 PM