![background image](http://html1.mh-extra.com/html/fair/bio80/bio80_maintenance-and-user-manual_3207389004.webp)
BIO Pellet Stoves
3
•
WARNING FOR THE USER
You shall do this for a proper functioning of the stove
1.
Use certified quality pellet;
2.
Before any ignition or ignition failure you shall clean the grate, so remove it, vacuum the space
below and then place it in its proper housing;
3.
Once a month you shall open the
T-fitting,
vacuum the dust from the surface having then the
foresight to close it properly;
4.
Clean and empty the ash pan before it is completely filled;
5.
Check that the pellet hopper is charged and eventually fill it.
ATTENTION! Remember: once a year, you must do a thorough cleaning of
flue
and of the stove for a
good functioning and for security of the environment.
For the extraordinary maintenance call the
Authorized Service Center
nearest to you.
When "SerV" appears on the display, it means that the preset maximum working hours have been reached.
Request maintenance assistance from a qualified professional. Failure to observe this precaution can damage
the stove and its electrical and mechanical parts, compromising operation, safety and validity of the
guarantee.
•
FAQ's & TROUBLESHOOT
Below are some common questions you might have when getting started with your new Bio Pellet Stove:
What size room is this pellet stove suited for :
This all depends on preference as well as your buildings insulation. For a newer home with good
insulation we recommend a medium sized room above (min. 5m x 5m x h~2.4m) with the minimum
output of this stove being 3kW (and can reach up to 7.5kW depending on your settings).
We recommend referring to an online stove output to room size calculator to help you decide the
correct size space for your new stove.
My Pellet Stove doesn't turn OFF straight away: This is because of the built in Cleaning feature
This feature goes through a 10 minute clean when your stove has been powered off after use. This is to
help maintain and make your pellet stove as efficient as possible.
To avoid having to go through the the process twice (when stove is being turned off and later when
turning back on) do not turn power off at the mains connection after use, insetead ensure you turn off
using the on/off power button on the stove itself.
The flame of my Pellet Stove keeps cutting out : The 4 most common reasons for this are:
1/ Not enough pellets in the fuel reservoir.
We recommend you fill the fuel reservoir to top before each use. When the fuel reservoir is below 1/3 full
you must refill.
2/ A downdraught due to flue system.
Please ensure the flue system is fitted currently and has an anti-down draught cowl.
3/ Quality of the fuel / wood pellets are damp.
Please ensure that wood pellets are stored properly at room temperature.
4/ Sometimes during maintenance users fit the Brazier grate back incorrectly leading to this issue.
Please refer to pg.19 for more information on how to refit the brazier grate correctly.
When I turn on my pellet stove it produces a lot of smoke in the combustion chamber that comes out. :
this happens when the brazier is not completely emptied of the pellets before ignition. The excessive
accumulation of pellets in the brazier therefore causes this phenomenon in the starting phase.
It is highly recommended to EMPTY AND CLEAN THE BRAZIER BEFORE EACH IGNITION to prevent
too much smoke from forming inside the combustion chamber.
Summary of Contents for BIO80
Page 33: ...BIO Pellet Stoves 31...