BIO Pellet Stoves
18
Optional remote control
With the remote control it is possible to adjust the heating power, the desired
ambient temperature and switch the apparatus on/off automatically.
To switch on the stove press buttons (P1) and (P6) simultaneously for 3 seconds;
the apparatus will automatically enter the ignition stage. After the ignition stage
it will enter normal operation mode and buttons P6 and P5 can be used to adjust
the heating power. Pressing (P1 +) or (P2 -) will adjust the desired ambient
temperature. To switch off the stove keep buttons (P1) and (P6) pressed
simultaneously for 3 seconds, display A will show the message “Off”. The remote
control operates with a 12 Volt MN21 type battery.
The batteries should be removed from the device before it is disposed of and
must themselves be disposed of safely.
Carry out the following operations to change the batteries:
-
use a screwdriver to loosen the screw on the back of the remote control;
-
slide out the cover and replace the batteries, taking care to orient the polarities correctly;
-
close the cover and tighten the screw.
Transferable models
Optional are supplied with 4 swivel castors of which 2 (front) with a
self-locking brake, in order to maintain a stable position of the stove.
To be placed instead of the fixed legs (Figure 13). For the
application, it is sufficient to remove the pins with a common wrench
and screw the wheels in place.
Pic.12
Pic.13
Summary of Contents for BIO80
Page 33: ...BIO Pellet Stoves 31...
