background image

BIO Pellet Stoves

 

27

 

 

 

 

 

GUARANTEE 

Fair srl guarantees the quality of manufacture and of the materials used.  

The Guarantee is valid for a period of 2 years, and runs from the date of first start-up performed within 20 days of 

the purchase by personnel certified by Fair authorised §Service Centre, as long as 24 months have not elapsed 

since the purchase date. In this case, the Guarantee will have to be recognised by the seller.  

The first start-up is flat-rate at the user's expense.  

The certificate must be marked by the stamp of the staff that carried out the installation.  

During that period, the dealer undertakes to repair and/or replace free of charge those parts which in its own 

exclusive judgement prove to be defective.  

Such repairs shall not alter the date of expiry of the Guarantee.  

 

The Guarantee is valid only on the following conditions:  

1 - The appliance must be installed with standard fume piping for pellet stoves with maximum length of 3/5 

metres including elbows (for different application, contact customer service).  

2 - Do not install on your own.  

3 -  Extraordinary maintenance must be carried out once a year by Fair Authorised Service Centres. 

4 – All the procedures in the "Maintenance" chapter must be observed carefully.  

 

The Guarantee does not cover:  

1 - Damage caused by incorrect installation of the equipment or by unsuitability of the system.  

2 - Faults resulting from negligence, lack of care, incompetent use, or repairs carried out by non-authorised third 

parties.  

3 - Damage caused by transportation.  

4 - Work to modify parameters or chimney flue.  

5 - Parts normally subject to wear or which last less than the aforementioned Guarantee period. For example:  

the glow plug, gaskets, the brazier, the firebox lining, ceramic glass, painted parts of ceramic etc.  

 

The guarantee is valid for 24 months from the date of first startup as indicated on this certificate, which should be 

completed correctly and accompanied by the receipt of purchase as proof. The apparatus is not guaranteed in 

any way for non-domestic use.   

 

The same applies in the event that the staff of the Technical Service Centre or of Fair srl discover while doing 

repairs that the date of installation/first startup is not the true one (which can be detected from identifying details 

and other elements in the equipment).  

The present certificate must be presented to the staff of the Authorised Customer Service Centre, together with a 

document of proof of purchase (invoice or docket), every time the client ask for an intervention during the 

guarantee period.  

Fair srl will not be liable for loss or damage caused to persons or things resulting from breakdown, forced 

suspension of use of the equipment or improper use.  

 

The Guarantee is valid only on the following conditions:  

1 - The equipment must be installed by qualified personnel.  

2 - The instalment must be done in accordance with the Laws in force in the territory and according to the 

directions given in the instruction manual.  

3 - Any repairs must be carried out only by staff of Authorised Service Centres.  

4 -  The Guarantee certificate must be completed in all its parts in a clear and readable manner. 

5 - If routine maintenance is performed regularly.  

6 - If the appliance is earthed.  

 

Fair srl grants no other Guarantees apart from the above.  

In case of any dispute, the Court of Vicenza shall have Jurisdiction. 

IMPORTANT: the first start-up is t the client's expenses.  

 

European Guarantee: 24 months on spare parts and labour.  

 

Registering your new stove 
Henley Stoves does not accept warranty submissions through post/email 
Please register your warranty at 

https://henleystoves.com/henley-warranty/

 

 

The appliance must be installed by a HETAS / METAC approved fitter in accordance with Building 

Regulations in order for the warranty to be valid. 

 

If upon opening the stove, it is found to be damaged in any way, do not attempt to install the stove. 

Return to retailer where it was purchased from. 

Summary of Contents for BIO80



































Reviews: