![background image](http://html1.mh-extra.com/html/fair/bio80/bio80_maintenance-and-user-manual_3207389015.webp)
BIO Pellet Stoves
14
Non-starting
If pellets don’t light up, the non-starting will be indicated by an alarm “Al 5 alar al 5 No lightning”. The
stove starting takes about 7/10 minutes with good quality pellets and an environment temperature of
about 10°C. If the environment temperature is lower, the starting plug is not able to start the stove; in
this case you can help putting a lighted igniter on the brazier.
Energy failure
After an energy blackout, when the stove is restored it will display “Al 1 alar al 1 Blac-out”. The fumes
gas extractor will discharge the fumes residuals for 20 minutes starting the switching off phase. When
the cooling phase is completed, empty the brazier from excessive pellets and start the stove again.
To bypass the start stage (e.g. the fire goes out unintentionally): just press key (6) for about 2 sec. and
the stove will immediately go into the ON operating phase; it is only possible to jump the startup phase
if the smoke temperature (detected by the probe) is over 55°-60°C. Below these values, after several
seconds the stove will return to the “Start” startup stage.
Temperature setting
To modify the environment temperature you can press any time key (P1+) or (P2-) to regulate it. The
chosen temperature and the environment temperature will be displayed on display B.
Fumes gas temperature
To verify the fumes gas temperature at the outlet keep key (P1) pressed for few seconds.
Switching off
To switch off the stove keep (P4) pressed, “Clean-
final
” will be displayed. During this phase the stoking
of pellets is stopped, the tangential fan is switched off and after 15 minutes the fumes extractor is turned
off too (that occurs anyway if the stove is hot or cold).
To put off the fire
If it happens you suddenly have to put off the fire burst out from the stove or chimney flue, use carbon
dioxide extinguisher (CO
2
) or ask for the fire-brigade intervention. Do not use water to put off the fire in
the brazier.
Pellets stoking
If you have to stoke the stove with pellets while it is working, make sure the pellets bag doesn’t get in
contact with any hot surface. Make sure the pellets tank is always closed with its lid. Don’t put any
residuals of combustible material (unburned embers) of the brazier into the pellets tank.
Menu 01 Clock setting
The present time and date can be set from this menu. The base card is provided with a lithium battery
which provides the internal clock with an autonomy of over 3/5 years.
•
Press set button (P3) on panel- this will bring you into the setting M1.
•
Set your time and date by scrolling through buttons (P5) and (P6).
•
To return to main screen, press power button (P4).
Menu 02 Timer setting
From this menu it is possible to program all the automatic start and stop of the stove choosing among
the various options: day, week or weekend.
Summary of Contents for BIO80
Page 33: ...BIO Pellet Stoves 31...