background image

hand o

v

er t

o

 the end user of the installation

universal oil-hydraulic operator for swing gates

HINDI 880 - evo

English

23

MAINTENANCE RECORD

hand over to the end user of the installation

Installation address:

Installation type:

Sliding gate

Over-head door

1

2

3

4

5

6

Service date

Stamp and signature

installation technician/maintainer

Signed for acceptance

end user

buyer

Technical maintainer

End user/s

Service description

Lateral folding
door

Swinging gate

Folding door

Bollard

.............................

Road barrier

Operator model:

Dimensions per gate leaf:

Weight per gate leaf:

Installation date:

Quantity of models
installed:

Maintainer:

Date:

NOTE WELL:

 this document must record any ordinary and extraordinary services including installation, maintenance, 

repairs and replacements to be made only by using Fadini original spare parts.
This document, for the data included in it, must be made available to authorized inspectors/officers, and a copy of it must 
be handed over the end user/s.

The installer/maintainer are liable for the functionalities and safety features of the installation only if maintenance is 
carried on by qualified technical people appointed by themselves and agreed upon with the end user/s.

X

the gate opener

istr_hindi880evo_GB.ai   11   18/06/2018   11:25:25

Summary of Contents for Hindi 880-Evo













Reviews: