INSTALLING THE ELECTRIC LOCK
An electric lock is always required to be fitted to the gate/s whenever
Hindi 880-evo corresponds to the reversible version
(non
locking action by the hydraulic circuit) and
the gate leaf is wide up to or wider than 2,0 meters
(Pic. 20 and Pic. 21).
Electric lock
in
vertical
position
Gate latch in closed
position welded to the
gate leaf closing first.
Gate stop plate
in closed position
to be fixed
to the ground.
Horizontal
electric lock
on the gate leaf closing
second.
This solution is recommended
for single gate installations.
Electric lock catching
plate to be fitted to
the gate leaf closing
first.
Electric lock
catching plate
to be fixed to
the ground
Gate stop plate
in closed position
Horizontal
electric lock
Vertical
electric lock
Screwdriver
to adjust power
Pic. 19
Pic. 20
Pic. 21
ADJUSTING THE THRUST POWER
In order to adjust the thrust power in opening and closing loosen or tighten the screws located inside the valve block cover, to be
accessed by the dedicated coded key (Pic. 19).
Red screw = it adjusts the thrust power in the closing cycle of the gate/s.
Green screw = it adjusts the thrust power in the opening cycle of the gate/s.
Thrust power in opening (green):
Clockwise = + power
Anti-clockwise = - power
Thrust power in closing (red):
Clockwise = + power
Anti-clockwise = - power
universal oil-hydraulic operator for swing gates
HINDI 880 - evo
English
21
istr_hindi880evo_GB.ai 9 18/06/2018 11:25:24
