background image

L I S T E D

US

C

REV-08/31/11

Printed in China for Gates That Open, LLC

ANNIVERSARY

SERIES

HEAVY DUTY

©

2004 Gates That Open, LLC

WARNING!

This equipment is similar to other gate or door equipment and meets or exceeds 

Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has 

hazards associated with its use and therefore by installing this product the installer 

and user accept full responsibility for following and noting the installation and 

safety instructions. Failure to follow installation and safety instructions can result 

in hazards developing due to improper assembly. You agree to properly install 

this product and that if you fail to do so Gates That Open, LLC shall in no event 

be liable for direct, indirect, incidental, special or consequential damages or loss 

of profits whether based in contract tort or any other legal theory during the 

course of the warranty or at any time thereafter. The installer and/or user agree 

to assume responsibility for all liability and use of this product releasing Gates 

That Open, LLC from any and all liability.  If you are not in agreement with this 

disclaimer or do not feel capable of properly following all installation and safety 

instructions you may return this product for full replacement value.

READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before 

attempting to install and use this automatic gate opener.  This gate opener 

produces a high level of force.  Stay clear of the unit while it is operating and 

exercise caution at all times.

All automatic gate openers are intended for use on vehicular gates only.

This product meets and exceeds the requirements of UL 325, the standard which regulates gate opener safety, 

as established and made effective March 1, 2000, by Underwriters Laboratories Inc.

3121 Hartsfield Road • Tallahassee, Florida, USA 32303

Telephone GTO Sales: 1-800-543-GATE (4283) or (850) 575-0176 • Fax (850) 575-8912

or GTO Technical Service: 1-800-543-1236 or (850) 575-4144 • Fax (850)575-8950

www.gtoaccess.com 

Installation Manual for the

Summary of Contents for Silver-HD Single













































Reviews: