NetPA Ultra Series • DSP Configurator Software
Line/AT Output Processing
The output processing chain in DSP Configurator is represented by a string of blocks (see
figure 78). Each block contains a specific processor or type of processor. Each output
contains the following processor chain:
•
Line/ AT Output Trim Block
•
Line/AT Output Delay Block
•
Line/AT Output Filter Block
•
Line/AT Output Dynamics Block
•
Line/AT Output Attenuation Block
Figure 78.
Output Processing Chain
Line/AT Output Trim Block
Double-click the output
Trim
block to open the
Post-mixer Trim
dialog box.
Figure 79.
Output Trim Block
The
Post-mixer
Trim
dialog box provides pre-processing gain and attenuation control for
the selected output.
1
2
3
4
5
1
2
3
4
5
Figure 80.
Post-mixer Trim Dialog Box
1
Output Name
—
This name changes to match the default or user defined output name.
2
Post-mixer Trim Fader
— Click and drag the trim fader to provide up to 12 dB of gain
or 12 dB of attenuation in 0.1 dB steps. Click the trim fader and use the
<Up Arrow>
or
<Down Arrow>
to adjust the fader up or down in 0.1 dB steps.
3
Post-mixer Trim Text Box
— Allows the user to enter a gain or attenuation value in
0.1 dB steps.
4
OK Button
— Confirms changes made to the contained parameters and closes the
Post-mixer Trim
dialog box.
5
Cancel Button
— Reverts any changes made to the contained parameters back to
their states when the current instance of the
Post-mixer Trim
dialog box was opened
and closes the dialog box.
Line/AT Output
Processing
figure 39.
Output Processing Chain
figure 40.
Output Trim Block
figure 41.
Post-mixer Trim Dialog Box
1
Output Name
2
Post-mixer Trim Fader
3
Post-mixer Trim Text Box
4
OK Button
5
Cancel Button
52
